JS-ICON™ Series wall-mount dimmer racks represent the ultimate value in hi-performance dimming! Next generation "system-on-a-chip" technology coupled with state-of-the-art inductor technology provides unsurpassed quality in professional grade SCR dimming. Advanced next generation hardware and software designs reduce stand-by power consumption to less than 1 Watt, allowing for compliance with the International Energy Agency's "One Watt Initiative" for standby power consumption. This makes JS-ICON™ Series the "greenest" dimmer racks available! Available in a number of different sizes and configurations, JS-ICON™ Series dimmer racks are designed for side-by-side installation and high density requirements. Intuitive LCD user interface combined with dual DMX inputs, analog inputs and contact closure inputs allow for industry wide application. Removable cover allows for ease of installation and serviceability. On demand "MagLev®" thermal management technology produces superior cooling that is virtually silent making JS-ICON™ the natural choice for "quiet space" dimming installations. Exclusive "lamp warming" techniques extends lamp life considerably while maintaining industry leading performance!

JS-ICON™ 1220 12x20 Amp (2400 Watt) dimmers Wall Mount Dimmer/Relay Rack	JS-ICON™ 2410 24x10 Amp (1200 Watt) dimmers Wall Mount Dimmer/Relay Rack	JS-ICON™ 2413 24x13 Amp (1560 Watt) dimmers Wall Mount Dimmer/Relay Rack	JS-ICON™ 1210/620 12x10 Amp (1200 Watt) + 6x20 Amp (2400 Watt) dimmers Wall Mount Dimmer/Relay Rack

	Download JS-ICON™ Series Dimmer/Relay Rack Cutsheet (PDF)
	JS-ICON™ Series Wall Mount Dimmer User Manual REV 1 (PDF)
	JS-ICON™ Series Wall Mount Dimmer User Manual REV 2 (PDF)
	JS-ICON™ Series Dimmer/Relay Racks • Press Release PDF
	JS-ICON™ Series Wall Mount Dimmer Specifications
	For Customer Pricing Click Here

• Available in multiple sizes and configurations.
• The only "green" dimmer system that complies with the International Energy Agency's 1 Watt Initiative. Unique power saving "stand-by" mode reduces power consumption to less than 1 Watt. Standby power shall not exceed 1 Watt.
• Dims standard or low-voltage incandescent quartz lamps.
• Individual dimmer profile selection permits safe and silent non-dim control of fluorescent loads, HID lighting, motors, etc.
• Dual DMX512-A inputs with on-board protocol manager. Optional wireless DMX receiver.
• Unique "lamp warming" feature extends lamp life. Special proprietary lamp filament warming techniques results in substantially lower (up to 70%) in-rush current resulting in lower peak energy demand requirements and increased lamp life. This feature alone has the ability to dramatically extend lamp life and realize electricity cost savings over the life of the system.
• Analog and dedicated dry contact BMS inputs for interface with HVAC, security and audio.
• "Load Shed" inputs for power management and photocell interface.
• LCD user interface for easy setup and monitoring.
• Over-heat and over-current protected.
• Non proprietary dimmer SCR's are 200% rated and are readily available (stock) items from your local electronic distributors.
• On-demand 'MagLev®' thermal management technology produces superior cooling that is virtually silent with a maximum noise level of 26dBA when the internal heat sink temperature exceeds 75°C.
• Ease of servicing when scheduled maintenance or service is required. Only a single screwdriver is required to replace common service items (such as SSR packs). All components in the assembly can be serviced from the front of the rack.
• Built in status LED's and diagnostics from the keypad and on-board LCD permits ease of troubleshooting. 24/7 technical factory support ensures piece of mind.
• Nominated "Product of the Year" at the Lighting Dimensions International (LDI) tradeshow in Las Vegas, NV, October 2008.

User Manual

Dimensional Specifications

Metal Assembly

JS-ICON™ Series Wall Mount Dimmer Internal Rack Images

Bottom View	Command Center	Contractor Section	Control Input	Cover Removed
Cover Removed	Load Terminals	Neutral Bar	SSR	JS-ICON™ Processor & IO

info@johnsonsystems.com

Copyright © 2012, Johnson Systems Inc., All Rights Reserved
JavaScript DHTML Drop Down Menu By Milonic